Viablue T6s F-plugs - solder version

ViaBlue ™ T6s F solder version.

ViaBlue ™ T6s F connectors are high quality, high end F connectors with bronze contact pins. All contact surfaces are 24 carat gold plated. The connector housing is made of aluminum. There are two variants available, one solder version and one screw version. With the solder version, cables up to 9.5 mm Ø, with the screw version, cables up to 8 mm Ø can be mounted.

For assembly, the stripped cable ends are soldered to the contact part of the T6s F plug. The contact part can be completely detached from the connector housing. The M4 threaded screw serves as a strain relief. With the included Diameter Decreasers, which reduce the internal diameter in the connector input area if required, cables of 3-9.5 mm Ø with high strain relief strength can be mounted at all listed cable thicknesses.

The stripped cable is pushed into the connector inner housing. The conductor is guided through the insulation in the pin cylinder, the twisted 360 ° turned over mass is pressed to the insulation stop. By turning the pin screw and the inner strain relief screw, the cable is firmly fixed in the connector inner housing. Finally, the two outer screws are tightened after sliding the aluminum sleeve. With the T6s screw version, cables of 7-8 mm Ø can be mounted.

Technical specifications:

• Designation: T6s F connector
  
  
• Max. Outside diameter: 13.5 mm
  
  
• Contact: F-Type Norm
  
  
• ROHS Directive / Conformity: ROHS compliant
  
  
• Finishing: 24ct gold plating
  
  
• Total length: 42.5 mm
  
  
• Packing unit: 2 Pieces
  
  
• Marking: black
  
  
• Screws: 1.5 mm hexagon socket