Aeco ABC-1451 - BNC plugs (gold-plated)
- In a specified size range for the cables, it will allow cables to maintain a regular percentage of the section conductor
Aeco ABC-1451 - BNC plugs (gold-plated)
Provide much selection of the cable type. In order to achieve the best transmission effect (VSWR approaches 1) in RF fields, we will concentrate the specifications for the correspondence between connectors and cables. For example, the Japan specification (4C, 5C) or US specification (RG-59, RG-6U) and other specification and impedance, You must choose the same specification and impedance for the connectors and cables. The definition of the specifications is to maintain a regular percentage of the section conductor and insulation diameter ratio connection after assembly. In case of the unclear specification of the cable, it will cause there no corresponding connector. Under these circumstances, ABC-14 will be proposed a solution on it. In a specified size range for the cables, it will allow cables to maintain a regular percentage of the section conductor and insulation diameter ratio after complete assembly and also achieve the best transmission effect. It’s allow to connect conductor by solder or crimp. The method of main contact pin to suit several secondary contact pin; Not only to extend the compatibility, also increase the suitable ability of cable and connectors. Secondary contact pin’s cross cutting and shrink design.Which is able to choose the solder or crimp method to connect the contact cable conductor with contact pin of the connector. The conduct material is made by high pure copper (beryllium copper) and plated without nickel base. Focus provide the client who has requirement of Hi-End by highest quality design and material.
Specification aeco ABC-1451. Material: Contact Pin: beryllium Copper (C17300 / copper contain 97% at least) Body: Brass Zinc alloy (C3604) Spring: Steel Washer: Steel Shell: Brass Zinc alloy(C3604) Screw: Stainless Steel(SUS304) Finish: Contact Pin: 10u" gold plating (no nickel base) Body: 10u" gold plating (no nickel base) Spring: Nickel plating Washer: Nickel plating Shell: Satin nickel plating + topcoat Screw: Nature Electrical Characteristics: Impedance: 50 ohms Frequency Range: 1GHz VSWR: up to 1.2 Contact resistance < 0,1 mOhm
- Cable hole without sleeve: 10.5mm
- Cable hole with sleeve: 06.5/08.5mm
- Biggest OD: 14.5mm
- Total Length: 42.0mm
- The corresponding of the cable size: Center conductor <01.5mm>
- Insulation OD >03.0mm
- Woven shield OD>07.5mm>
- Outer plastic sheath OD <10.5mm
